Supported Printers
PrintHQ Bridge supports a wide range of 3D printers through native protocol adapters. Select your printer brand below for a detailed setup guide.
Quick Reference
| Platform | Protocol | Required Info | Camera | Remote Print | Object Exclusion |
|---|---|---|---|---|---|
| Bambu Lab | MQTT over TLS | IP, Serial, Access Code | Yes | Yes (FTP) | Yes |
| Creality | REST / WebSocket | IP | — | — | — |
| FlashForge | HTTP + TCP | IP, Serial, Check Code | Yes | — | — |
| Elegoo | SDCP WebSocket | IP | Yes | — | — |
| Anycubic | Moonraker (via Rinkhals) | IP | — | Yes | Yes |
| OctoPrint | REST API | IP, API Key | Custom | — | — |
| Klipper / Moonraker | WebSocket JSON-RPC | IP | Custom | Yes | Yes |
Tested Models
Bambu Lab
X1 Carbon, X1 Carbon Combo, X1E, P1S, P1P, A1, A1 Mini
Creality
K1, K1 Max, K1C
FlashForge
Adventurer 5M, Adventurer 5M Pro, Adventurer 5X
Elegoo
Centauri Carbon, Neptune 4 Pro, Neptune 4 Plus, Neptune 4 Max, OrangeStorm Giga
Anycubic
Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra S1 (requires Rinkhals)
OctoPrint / Klipper
Any printer running OctoPrint or Klipper with Moonraker
What Bridge Monitors
All supported printers report a common set of telemetry data:
- Nozzle temperature (current and target)
- Bed temperature (current and target)
- Chamber temperature (if available)
- Fan speeds (part, auxiliary, chamber)
- Print state (idle, preparing, printing, paused, finished, failed)
- Print progress, filename, layers, remaining time
- Speed percentage
- WiFi signal strength
- Error messages
Additional features vary by platform — see each printer guide for details.
Have a printer not listed?
We're always expanding our supported printer list. If you'd like to help test Bridge with your printer, join our Discord and let us know!